Homepage
|
> |
Installation
> Octapus Ice
.
GRmods
- Safe
Console Hacking!
Octapus Ice requires 21 wires to solder &
1 cut in the mainboard,
for steady & safe opperation in v9/v10 P$2 consoles! |
| >
Diagrams of Octapus Ice in V9 P$2 consoles |
Octapus
Ice can be installed in v9 P$2 with only 21 wires to solder.
Thanks to the small dimensions of this modchip, it can easilly be
placed, either in the top or in the bottom side of P$2 mainboard.
- Diagrams
for V9 P$2 consoles (SCPH-5xxxx)
Before even thinking to install a no-swap modchip in your v9 P$2 console,
it is recomended to do V9Fix, that is adding steadibility to LA6508
motor controller chip, that usually get burned.
- V9Fix for
protecting LA6508 (SCPH-5xxxx)
Some other modchip manifacturers may not inform you about this fix
and these are the same guys that are selling you LA6508 replacement
chips, for your damaged P$2... |
| >
Diagrams of Octapus Ice in V10 P$2 consoles |
Octapus
Ice can be installed in v10 P$2 with only 21 wires to solder.
Thanks to the small dimensions of this modchip, it can easilly be
placed, either in the top or in the bottom side of P$2 mainboard.
- Diagrams
for V10 P$2 consoles (SCPH-5xxxx)
Before even thinking to install a no-swap modchip in your v10 P$2
console, it is recomended to do V10Fix, that is adding steadibility
to LA6508 motor controller chip, that usually get burned.
- V10Fix for
protecting LA6508 (SCPH-5xxxx)
Some other modchip manifacturers may not inform you about the fact
that 20% of the modyfied consoles will be damaged after the installation
of a no-swap modchip in SCPH-5xxxx P$2 consoles... |
|
GRmods
- Safe
Console Hacking!
|
We
strongly recomend you to avoid soldering in P$2 consoles,
as this may cause a quick loss of your Laser Eye Adjustment,
or an irriversible damage in your P$2 mainboard... |
User-Friendly
Installation |
|
|
|
Products
