| >
How to Open your P$2 console! |
 |
Installation
of Octapus requires from you to open your P$2 console,
voiding the guarrantee shield.
the only needed tools are 2 screwdrivers (Philips type) and 1 pair
of pincers.
For
any damage you may cause in your console,
we are not rsponsible. |
| >
Step by Step Guide |
 |
Step#1 |
| Unscrew
8 screws that are hiding under 8 black pads in the bottom side of
your console, with Philips type screwdriver. |
 |
Step#2 |
| Remove
the top cover of your console. |
 |
Step#3 |
| Remove
2 screws that are holding joypad inputs. |
 |
Step#4 |
Unscrew
2 crews that are holding cooler system.
Caution: 1 screw is hiding under On/Off Button. |
|
Step#5 |
| Close
back the top cover of your console. |
 |
Step#6 |
| Now,
remove the bottom cover of your console. |
 |
Step#7 |
| Unscrew
the 4 screws that are holding the Power Supply and remove the metal
protective case of HDD. |
 |
Step#8 |
Following the steps vise versa,
you may close back your P$2 console,
after finishing the installation of Octapus. |
|
GRmods
- Safe Console Hacking!
We
strongly recomend you to avoid soldering in P$2 consoles,
as this may cause a quick loss of Laser Eye Adjustment,
or an irriversible damage in your P$2 mainboard...
|
Products
